After you Add Discovered Devices to managed devices, you can:

  • View monitor setup. View monitors associated with one or more selected devices. Some monitors are automatically associated with the device after network discovery. Ping, CPU Utilization, and Disk Utilization, for example are typically immediately associated with a device when you run discovery using appropriate SNMP or Windows credentials.
  • Assign additional monitors. As you determine your site's needs, you can create custom monitors based on the monitor types (Active, Passive, Performance) available in the WhatsUp Gold Monitor Library (SETTINGS menu > Libraries > Monitors) or by cloning and customizing as needed.
    Note: Some device-specific monitors require you to select a credential when the monitor is assigned. Others are applied by default after discovery and role identification.
  • Switch monitors On or Off. Monitors associated with a device might not be On by default. For example, Interface Utilization monitor is turned Off by default while Ping monitor is turned On by default.
    Tip: Unlike Active and Performance Monitors, Passive Monitors do not have a concept of on/off. Passive Monitors are subscribers/listeners and do not require WhatsUp Gold active polling.
  • Check performance monitor statistics and utilization. Click a node on the map, then click the Performance Monitors section on the Device Properties card.

Monitor Summary Status

Tip: To assign specific monitoring schedules directly to a device role, see the section titled Device Role Settings.

Assign Additional Monitors

You can assign new or existing monitors to a device.

To assign monitors to a device:

After you have created monitors based on monitor types, you can assign them to your managed devices.

  1. Select one or more devices on the My Network map or the collapsible device list to access the Monitors window.
  2. From the monitors panel, select the monitors you want to apply, and click the Apply to selected devices button.
Note: You create and manage new monitors using the Monitoring Library (SETTINGS menu > Libraries > Monitors).

To add a new monitor:

You can add new monitor instances to the monitor library based on an existing monitor or 'built in' monitor type.

  1. Click the Add icon, choose a monitor type, and configure it.
  2. Assign your monitor to a device, many devices, or a device group.
  3. Switch On/Off the monitor. (For example, some monitors are switched Off by default.)

About Monitor Types

Please note, you can test any active monitor directly from the Monitors Library to ensure it is configured properly. For additional information and applicable procedure steps, please see Active Monitors.