Kemp 360 Central gives users the ability to centrally reboot LoadMasters. You can reboot a single LoadMaster or up to 13 selected LoadMasters simultaneously.

Note: When Kemp 360 Central issues a reboot command to a device, no other operations (for example, taking a backup) are allowed until the device reboots and is available again.

Reboot a LoadMaster using the Kemp 360 Central interface by following these steps:

  1. Click the relevant network or subnetwork in the left pane of the UI.
  2. In the right pane, select the System Configuration tab and then expand the System Reboot section.

    This displays a list of the LoadMasters on the network you selected in the previous step, as shown in the example below.

  3. To reboot a single LoadMaster, select the check box beside the LoadMaster for rebooting and click the Reboot button.
  4. Reboot up to a maximum of 13 LoadMasters by selecting the check box of each LoadMaster and then clicking the Reboot button. Alternatively, select the Select All check box to select up to 13 devices on the screen.

    Note: If you select 13 different devices on different pages, you can deselect all devices by clicking Reset. In addition, you can use the Search field to quickly locate the devices you want.
  5. Click OK.

  6. The system displays Rebooting… next to each rebooted unit until the unit is available again.
Note: If your LoadMasters are in a HA configuration, you can reboot them using the shared IP address or directly from the devices.