User Authentication - Single Sign on

Configure Local Service Provider/Relaying Party Settings

These settings are used to identify the MOVEit Server and organization as the Service Provider, secure the SAML communications, and to determine how MOVEit will receive responses from the Identity Provider.

1. Create a Signing Certificate.

   The MOVEit Server (Service Provider) sends a request to the Identity Provider. The private portion of the Signing Certificate assures that the request is from the MOVEit Server. The Identity Provider uses the public portion to verify the signature.

   Click Create Certificate to open the Signing Certificate page. Enter the appropriate values, then click Create Certificate. Only the Common Name (CN) is required.

   The new certificate is shown in the list.

   You always have the option of replacing or deleting an existing certificate.

   Anmerkung: While most servers require a Service Provider to have a signing certificate to sign requests, the encryption certificate is optional, though highly recommended for security.
2. Create an Encryption Certificate.

   The Identity Provider sends an "authentication assertion" or other response to the MOVEit Server. The public portion of the Encryption Certificate is used to encrypt the assertion. MOVEit uses the private portion to decrypt the assertion.

   Click Create Certificate to open the Encryption Certificate page. Enter the appropriate values, then click Create Certificate. Only the Common Name (CN) is required.

   The new certificate is shown in the list.

   You always have the option of replacing or deleting an existing certificate.

3. Set the appropriate Assertion Consumer Interfaces.

   This interface determines how MOVEit will receive the response (the user authentication) from the identity provider. You can enable multiple interfaces, in which case the identity provider will use the first interface listed whose binding it supports.

   • HTTP-Post: The HTTP-Post binding means that MOVEit will receive the security assertion from the identity provider through the client browser using an HTTP POST request. This is the most frequently used and most widely supported binding for assertion consumer interfaces. This is enabled by default.
   • HTTP-Artifact: The HTTP-Artifact binding means that MOVEit will receive a reference to the security assertion (this reference is called an "artifact") from the identity provider through the client browser using an HTTP GET request, rather than the assertion itself. MOVEit will then contact the identity provider directly via SOAP in order to request the actual assertion, using the provided artifact.

     HTTP-Post is more widely supported, and is good enough for most situations, but is less secure than HTTP-Artifact because the assertion data passes through the client browser, giving that browser an opportunity to access data that may not be appropriate for the client to see. This can be compensated for by using an encryption certificate, but only if the identity provider supports encrypting response messages.

     HTTP-Artifact is more secure, since the assertion data never passes through the client browser – only the reference "artifact" does. However, it is less widely supported, and also requires a direct connection between MOVEit and the identity provider, which some firewall rules may not allow from the DMZ network segment.

4. Set the appropriate Single Logout Interfaces.

   This interface determines how the identity provider sends a logout response or request to MOVEit. You can enable multiple interfaces, in which case the identity provider will use the first interface listed whose binding it supports.

   Anmerkung: Shibboleth does not have sufficient support for single logout and single logout with Shibboleth is not best practice. It is not enabled by default in the Shibboleth Identity Provider, so MOVEit will not show the logout feature in the administrator interface. If it is enabled in the Identity Provider, we recommend you disable it here by clearing the Enabled option for all Single Logout interfaces.
   • HTTP-Post: The HTTP-Post binding means that MOVEit will receive the logout request or response from the identity provider through the client browser using an HTTP POST request. This is enabled by default.
   • HTTP-Redirect: The HTTP-Redirect binding means that MOVEit will receive the logout request or response from the identity provider through the client browser using an HTTP GET request.
5. You must provide the identity provider with the service provider metadata file that establishes your MOVEit Server organization as the service provider. Identity providers can access this file by the Service Provider Metadata URL.

   When configuring the Identity Provider, you can provide this URL directly to the identity provider in the configuration settings. This requires that the identity provider has direct internet access to the MOVEit Server. If that's not the case, you can download the file and then upload it to the identity provider.

   Anmerkung: This metadata file is updated when you change settings for a certificate, Assertion Consumer Interface, or Single Logout Interface. Make sure your identity provider is updated with the new file.

Add Federated Identity Providers

These settings add the identity providers (for example, an Active Directory Federated Services (ADFS) server) to which MOVEit Server can send an authentication request. The identity provider can be configured to offer two types of service: SAML single signon (available from the web browser), and WS-Trust (available as an external authentication method to other types of clients).

The Single Signon settings page shows the list of identity providers available (if any) to this organization.

1. To add a new provider, click Add Identity Provider. The Add SAML Identity Provider page opens.

   

   Identity providers that support SAML and WS-Trust authentication will provide a metadata file or URL that is used to configure them as a provider.

2. Click Browse to find and upload the metadata file for the provider; then click Add Identity Provider.

   Or

   Enter a URL for the provider's metadata, then click Add Identity Provider.

3. Click Save.

The entry for the identity provider is created and added to list of identity providers on the Settings (Single Signon) page.

Editing an Identity Provider

You can edit an identity provider entry to make changes to some of the settings, to select whether to use Single Signon or WS-Trust services, and to define whether and how a user account in the identity provider is created as a user in MOVEit.

To edit an identity provider, click the Edit action to the right of the entry.

Edit Federated Identity Provider Settings

These settings identify the identity provider and configure how it will communicate with the service provider (MOVEit). The settings you need to use will depend in large part on your third-party identity provider. See your identity provider's documentation for requirements. For notes from our own testing with different identity providers, see SAML Single Signon Configuration Notes.

Name: Enter a descriptive name. This name will be shown on the sign on page if you have multiple identity providers for an organization. Users can choose among the providers.

Entity ID: The URL for the identity provider. This comes from the metadata file; it cannot be modified here.

Enabled: A newly added identity provider is disabled by default. If you want to enable it, click Yes.

Time Condition Skew Allowance: This setting can prevent unnecessary authentication failures by allowing for some variation between the MOVEit Server clock setting and the identity provider's clock setting. By default, this is set to 60 seconds.

Direct User Signon Link: The URL link shown here provides direct access to the SAML Signon page. If you provide users with this link, they can skip the step of accessing the standard Sign on page, and having to then select an identity provider. After successful signon using this link, cookies stored on the user's browser will take them directly to the SAML Signon page on subsequent access.

Select Federated Identity Provider Services

These settings let you select which of the available services you want to use with this organization, including SAML Single Signon and WS-Trust Secure Token Authentication.

SAML Single Signon Service

The identity provider provides single signon services using the SAML 2.0 protocol. These services are for single signon from a browser.

Enable SAML Support: Enable SAML single signon for this organization.

Signing Certificate: The certificate used to authorize responses from the identity provider. This comes from the metadata file; it cannot be modified here.

Encryption Certificate: The certificate used to encrypt responses from the identity provider. This comes from the metadata file; it cannot be modified here.

Single Signon Services: Sets the service that MOVEit Server uses to send authentication requests through the client browser.

Single Logout Services: Sets the type of service that MOVEit Server uses to send a logout request through the browser.

Note: The binding types for Single Signon and Single Logout services are essentially the same as those used in the Service Provider assertion consumer and single logout interfaces, though in this case, MOVEit Server is the sender and the identity provider is the receiver.

WS-Trust Security Token Service

Shows the WS-Trust external authentication sources, if any, that are configured to use this identity provider. WS-Trust service can request authentication tokens using provided username and password credentials. In this way, WS-Trust can provide external authentication from a client, for example, an FTP or SSH client.

Enabled: External authentication using WS-Trust is enabled for this organization.

Name: The name given to the WS-Trust authentication source when it was configured in MOVEit.

Edit: Click this button (to the right of the entry) to view or change the settings for this authentication source.

Add WS-Trust Authentication Source: Click this button to create a new WS-Trust source.

For information about creating or editing a WS-Trust source, see the External Authentication > WS-Trust (Authentication Only) page.

Edit Federated Identity Provider User Settings

These settings configure how MOVEit will use the user information from the identity provider to create or modify the user account in MOVEit.

These settings will depend on which user attributes are available from your Identity Provider. You need to coordinate with the Identity Provider administrator. Note that the SAML Name ID attribute is always available from the Identity Provider.

The Login name, Full name, and Email template settings determine what values will be used for the new user's login name, full name, and email address fields if they are added to the MOVEit user account.

Attribute name: The mapping of Identity Provider attributes to MOVEit Transfer user properties is done by selecting an attribute advertised by the Identity Provider in its metadata file. If an Identity Provider does not advertise the available attributes in the metadata file, you can use the Attribute name box to manually enter an attribute name in the user settings. The value to use in the attribute name is dependent on the Identity Provider. ADFS provides a schema based on URIs (for example, for Full name, use: http://schemas.xmlsoap.org/claims/CommonName). Shibboleth provides a schema based on the urn OID (for example, for Full name, use: urn:oid:2.5.4.3). Refer to the Identity Provider documentation for the appropriate schema and values to use.

Auto-create account on signon: By default, when a new user successfully signs on, an account will be created in MOVEit. If you want to disable it, click No

Create user as a clone of: Lets you (the administrator) select an existing user as a template for users created by this authentication source. When this setting is enabled, the selected user will be cloned to create the new user account.

Edit Federated Identity Provider Group Settings

These settings configure how MOVEit will use group information from the identity provider to add a group setting for the new MOVEit user.

Group membership behavior: This setting determines how group memberships will be dealt with. When set to Ignore Differences, identity provider group memberships will be ignored, except in the case of the Group Check Mask setting. When set to Report Differences, differences between MOVEit group memberships and identity provider group memberships will be reported in the log. When set to Correct Differences, differences between MOVEit group memberships and identity provider group memberships will be corrected, if possible. MOVEit groups will NOT be added automatically, only group memberships. Groups existing on the identity provider but not on the MOVEit server will be noted as errors.

Group membership attribute: Select from the list of object properties to set the name of the group, if a group exists on the identity provider.

Attribute name: As with the user settings, if an Identity Provider does not advertise the available group attributes in the metadata file, you can use the Attribute name box to manually enter an attribute name for the group settings. Refer to the Identity Provider documentation for the appropriate schema and values to use.

Group Mask: These settings determine which groups will be included when syncing identity provider and MOVEit group memberships. The rule can be set to include groups except those matching one or more of the masks, or ignore groups except those matching one or more of the masks. The mask list can be one or more group name masks, separated by commas. Group name masks may contain the multiple-character wildcard (*), and/or the single-character wildcard (?)

Group Check Mask: These settings operate similarly to the Group Mask settings, but determine the group memberships used by the system to determine if a user should be allowed to sign on or be automatically created (or mentioned in the error reports if the source is configured to not do auto-creation of users). By default, this setting is set to allow all users regardless of group memberships. The rule can also be set to deny users except those in groups matching one or more of the masks, or to allow users except those in groups matching one or more of the masks. As with the Group Mask setting, the mask list can be one or more group name masks, separated by commas. Group name masks may contain the multiple-character wildcard *, and/or the single-character wildcard ?.

Click Save to make your changes to the identity provider.

Update Federated Identity Provider Settings From Metadata

Similar to when you first add an identity provider using the metadata file, you can update the identity provider settings using this feature.

1. Click Browse to find and upload the metadata file for the provider; then click Update Identity Provider.

   Or

   Enter a URL for the provider's metadata, then click Update Identity Provider.

2. Click Save.

The entry for the identity provider is updated using the information in the metadata file.

Update Federated Identity Provider Security Token Service Endpoints from Metadata

When you create a WS-Trust authentication source, you add the security token service information using the metadata file from your identity provider. If the information on the token service changes (on the identity provider), you can update the settings using this feature, so that MOVEit will have the new token service information.

1. Click Browse to find and upload the metadata file for the security token service; then click Update Identity Provider.

   Or

   Enter a URL for the provider's metadata, then click Update Identity Provider.

2. Click Save.

The entry for the identity provider is updated using the information in the metadata file.