LoadMaster LM-XHC60-NG (APAC only)
- Last Updated: March 11, 2025
- 1 minute read
- LoadMaster
- LoadMaster GA
- Documentation
Note: The LoadMaster LM-XHC60-NG hardware is only
available in the Asia-Pacific (APAC) region.
Port Location - Front Panel
| Item No. | Item | Description | Notes |
|---|---|---|---|
| 1. | RAID (Dual HDD) | RAID 1 (mirroring) Hot-Swap Disk (x2) | Disk mirroring - replicating of data to two or more disks |
| HDD LED - Green | Indicates HDD operating normal | ||
| HDD LED - Red | Indicates possible HDD issue (contact Progress Kemp Customer Support) | ||
| Rebuild LED - Blinking amber | Indicates HDD rebuilding process (could take several hours to complete) | ||
| 2. | ERR LED | Error LED - off | Indicates that the Power Supply Unit (PSU) status is normal |
| Error LED - red (blinking) | Indicates PSU failure - either one or both (contact Progress Kemp Customer Support) | ||
| STBY LED | Standby LED - Amber | Indicates always-on | |
| HDD LED | LED - Green (blinking) | Indicates HDD read/write activity | |
| LED - Off | Indicates no data transferring | ||
| PWR LED | LED - Green | Power on indicator | |
| LED - Red (blinking) | Indicates hardware monitor abnormality (contact Progress Kemp Customer Support) | ||
| LED - Off | Power off indicator | ||
| 3. | 1 Gb Ethernet ports | 1 GbE copper (RJ45) ports (x1) Fibre (SFP) port (x1) | Logical Assignment Port 0:1 map to ETH0:ETH1 |
| Activity LED - Blinking | Indicates network activity | ||
| Activity LED - Off | Indicates no network activity | ||
| 4. | USB ports | USB 3.0 ports (x2) | Allows USB devices to connect to the system |
| 5. | Console port | Console connection | Allows console devices to connect to the system |
| 6. | 100 Gb Fibre QSFP28 Ports | 100 Gb Fibre QSFP28 ports (x2) | Requires QSFP28 transceiver modules (purchase from
Progress Kemp) Logical Assignment Port 14:15 map to ETH14:ETH15 |
| Activity LED - Blinking | Indicates network activity | ||
| Activity LED - Off | Indicates no network activity | ||
| Link LED - On | Link - connection established | ||
| Link LED - Off | No link (cable disconnected) | ||
| 7. | 25 Gb Fibre SFP28 ports | 25 Gb Fibre SFP28 ports (x4) | Requires SFP28 transceiver modules (purchase from
Progress Kemp) Logical Assignment Port 10:13 map to ETH10:ETH13 |
| Activity LED - Blinking | Indicates network activity | ||
| Activity LED - Off | Indicates no network activity | ||
| Link LED - On | Link - connection established | ||
| Link LED - Off | No link (cable disconnected) | ||
| 8. | 10 Gb Fibre SFP+ Ports | 10 Gb SFP+ Ports (x8) | Requires SFP+ modules (purchase from Progress Kemp) Logical Assignment Port 2:9 map to ETH2:ETH9 |
| Activity LED - Blinking | Indicates network activity | ||
| Activity LED - Off | Indicates no network activity | ||
| Link LED - On | Link - Continuously illuminated | ||
| Link LED - Off | No link (cable disconnected) | ||
| 9. | 100 Gb Fibre QSFP28 ports | 100 Gb Fibre QSFP28 ports (x2) | Requires QSFP28 transceiver modules (purchase from
Progress Kemp) Logical Assignment Port 16:17 map to ETH16:ETH17 |
| Activity LED - Blinking | Indicates network activity | ||
| Activity LED - Off | Indicates no network activity | ||
| Link LED - On | Link - connection established | ||
| Link LED - Off | No link (cable disconnected) |
Port Location - Rear Panel
| Item No. | Item | Description | Notes |
|---|---|---|---|
| 10. | VGA port | Standard VGA interface | Used to connect a VGA monitor |
| 11. | Power switch | On/off switch | Press to power on or hold until the device powers off |
| 12. | Dual Hot-Swap Power Supply | 1300W 1+1 redundant power supply | Power source for the system, refer to item 2 for status LED Indicators. |
| LED - Green | Indicates power on mode | ||
| LED - Blinking green | Indicates standby mode | ||
| LED - Amber | Indicates loss of power supply redundancy and/or issue with power supply |