Port Location - Front Panel

Item No. Item Description Notes
1. RAID (Dual HDD) RAID 1 (mirroring) Hot-Swap Disk (x2) Disk mirroring - replicating of data to two or more disks
HDD LED - Green Indicates HDD operating normal
HDD LED - Red Indicates possible HDD issue (contact Progress Kemp Customer Support)
Rebuild LED - Blinking amber Indicates HDD rebuilding process (could take several hours to complete)
2. PB2 LEDPB1 LED Not used Not used Not used Not used
PWR LED LED – Green Power on indicator
LED – Off Power off indicator
HDD LED LED – Amber Indicates HDD activity
LED – Off Indicates no HDD activity
3. Reset Reset LoadMaster System reset
4. Micro USB type console ports Micro USB type Console Connection Allows micro USB console devices to connect to the system
5. USB Ports USB 3.0 Ports (x2) Allows USB devices to connect to the system
6. 1 Gb Ethernet ports 1 GbE copper (RJ45) ports (x16)

Logical AssignmentPort 0:15 map to ETH0:ETH15
Activity LED – Blinking Indicates network activity
Activity LED - Off Indicates no network activity
Link LED – On Link - connection established
Link LED – Off No link (cable disconnected)
7. 10 Gb Fibre SFP+ ports 10 Gbps Fibre SFP+ Ports (x4) Requires SFP+ transceiver modules (purchase from Progress Kemp)

Logical Assignment

Port 16:19 map to ETH16:ETH19
Activity LED - Blinking Indicates network activity
Activity LED - Off Indicates no network activity
Link LED - On Link - connection established
Link LED - Off No link (cable disconnected)

Port Location - Rear Panel

No Item Description Notes
8. VGA port Standard VGA interface Used to connect a VGA monitor
9. Power switch On/off switch

Press to power on or hold until the device powers off
10. Dual Hot-Swap power supply 450W 1+1 redundant power supply Power source for the system, refer to item 2 for status LED Indicators.
LED - Green Indicates power on mode
LED - Blinking green Indicates standby mode
LED - Blinking red with high pitch sound Indicates a loss of power supply redundancy and/or an issue with the power supply