Port Location - Front Panel

Item No. Item Description Notes
1. RAID (Dual HDD) RAID 1 (mirroring) Hot-Swap Disk (x2) Disk mirroring - replicating of data to two or more disks
HDD LED - Green Indicates HDD operating normal
HDD LED - Red Indicates possible HDD issue (contact Progress Kemp Customer Support)
Rebuild LED - Blinking amber Indicates HDD rebuilding process (could take several hours to complete)
2. ERR LED Error LED - Red Indicates that the system is experiencing an error during operation (contact Progress Kemp Customer Support)
STBY LED Standby LED - Amber Indicates that the system is on
HDD LED LED - Amber Indicates HDD activity

LED - Off

 Indicates no HDD activity
PWR LED LED - Green Power on indicator
LED - Off Power off indicator
3. Console port Console connection Allows console devices to connect to the system
4. USB ports USB 3.0 ports (x2) Allows USB devices to connect to the system
5. 1 Gb Ethernet ports 1 GbE copper (RJ45) ports (x2)

Logical Assignment

Port 0:1 map to ETH0:ETH1
Activity LED - Blinking Indicates network activity
Activity LED - Off Indicates no network activity
Link LED - On Link - connection established
Link LED - Off No link (cable disconnected)
6. Reset Reset LoadMaster

System reset
7. 10 Gb Fibre SFP+ ports 10 Gbps SFP+ ports (x8)

Requires SFP+ transceiver modules (purchase from Progress Kemp)

Logical Assignment

Port 2:9 map to ETH2:ETH9
Activity LED - Blinking Indicates network activity
Activity LED - Off Indicates no network activity
Link LED - On Link - connection established
Link LED - Off No link (cable disconnected)
8. 40 Gb Fibre QSFP+ ports 40 Gb Fibre QSFP+ Ports (x4)

Requires QSFP+ transceiver modules (purchase from Progress Kemp)

Logical Assignment

Port 10:13 map to ETH10:ETH13
Activity LED - Blinking Indicates network activity
Activity LED - Off Indicates no network activity
Link LED - On Link - connection established
Link LED - Off No link (cable disconnected)

Port Location - Real Panel

Item No. Item Description Notes
9. VGA port Standard VGA interface Used to connect a VGA monitor
10. Power switch On/off switch Press to power on or hold until the device powers off
11. USB ports USB 2.0 ports (x2) Allows USB devices to connect to the system
12. Dual Hot-Swap Power Supply 700W 1+1 redundant power supply Power source for the system. Refer to row 2 in the table above for LED status indicators.
LED - Green Indicates power on mode
LED - Blinking green Indicates standby mode
LED - Amber Indicates loss of power supply redundancy and/or issue with power supply