Configuring a Virtual Service for UDP Audio/Video Services on the External EDGE Servers

To configure a Virtual Service for UDP audio/video services on the External EDGE servers, follow the steps below:

1. In the main menu of the LoadMaster WUI, select Virtual Services.
2. Select Add New.

   

3. Enter the Virtual Address.
4. Enter 3478 as the Port.
5. Enter a recognizable Service Name, for example EDE UDP AV.
6. Select udp as the Protocol.
   Note: The combination of Virtual Address, Port and Protocol must be unique within the LoadMaster.
7. Click Add this Virtual Service.
8. Configure the settings as recommended in the following table:

   Section	Option	Value	Comments
   Standard Options	Persistence Mode	Source IP Address
   	Timeout	2 Minutes
   	Scheduling Method	least connection
   Real Servers	Real Server Check Method	ICMP Ping	Click the Add New… button and type the Real Server address.
   	Port	3478	Click Set Check Port.

9. Add the Real Servers.
10. Click the Add New… button.
    1. Enter the Real Server Address
    2. Enter 3478 as the Port.
    3. Click Add This Real Server.
    4. Click OK in response to the confirmation that the Real Server was added.

To view, modify, or delete any existing Virtual Services or Real Servers, select Virtual Services > View/Modify Services from the main menu of the LoadMaster WUI.