Configuring a Virtual Service for Audio & Video Services on the Internal EDGE Servers

To configure a Virtual Service for Audio & Video Services on the Internal EDGE Servers, follow the steps below:

1. In the main menu of the LoadMaster WUI, select Virtual Services.
2. Select Add New.

   

3. Enter the Virtual Address, using the format ###.###.###.###, for example 10.84.10.97.
4. Enter 3478 as the Port.
5. Enter a recognizable Service Name, for example EDI AV.
6. Select udp as the Protocol.
   Note: The combination of Virtual Address, Port and Protocol must be unique within the LoadMaster.
7. Click Add this Virtual Service.
8. Configure the settings as recommended in the following table:

   Section	Option	Value
   Standard Options	Persistence Mode	Source IP Address
   	Timeout	30 Minutes
   	Scheduling Method	least connection

9. Add the Real Servers.
   1. Expand the Real Servers section.
   2. Click the Add New… button.
   3. Enter the relevant Real Server Address.
   4. Enter 3478 as the port.
   5. Click Add This Real Server.
   6. Click OK in response to the confirmation that the Real Server was added.

To view, modify, or delete any existing Virtual Services or Real Servers, go to the Virtual Services > View/Modify Services option in the main menu of the LoadMaster WUI.