1. The following are the steps involved and the values required to set up the third Fujifilm Synapse Virtual Service:
  2. In the LoadMaster Web User Interface (WUI) main menu, go to Virtual Services > Add New.

  3. Enter the same IP address in the Virtual Address text box as you did when setting up the Synapse HTTP and Synapse DICOM Virtual Services.
  4. Enter 443 in the Port text box.
    Note: HTTP requests received on Port 80 and external (HTTPS) requests on Port 443 are distributed to their most available server in the same adaptive manner.
  5. Enter a recognizable Service Name, for example Synapse External.
  6. Ensure TCP is selected as the Protocol.
  7. Click Add this Virtual Service.
  8. Configure the settings as recommended in the following table:

    Section

    Option

    Value

    		 Comments

    SSL Properties

    SSL Accelerationt

    Enabled

    Click OK to the pop-up that appears.

    Reencrypt

    Enabled

    Supported Protocols

    TLS1.0; TLS1.1; TLS1.2; TLS1.3

    		 While this workload may not support TLS1.3 yet, we recommend enabling it for future proofing.
    Require SNI hostname Disabled
    Client Certificates No Client Certificates Required

    Standard Options

    Subnet Originating Requests

    Enabled

    Persistence Mode Source IP Address
    Timeout 1 Hour
    Scheduling Method resource based (adaptive)

    Advanced Properties

    Added HTTP Headers

    None
    Real Servers Real Server Check Method HTTPS Protocol
  9. Add the Real Servers:
    1. Click the Add New button.
    2. Enter the Real Server Address.
      Note: This is the address of the backend server.
    3. Enter 443 as the Port.
      Note: The Real Server Port should match the Virtual Service Port.
      Note: The Forwarding method and Weight values are set by default. These can be changed by an administrator.
    4. Click Add this Real Server. Click OK to the pop-up message.
    5. Repeat the steps above to add more Real Servers as needed, based on the environment.