The following are the steps involved and the values required to configure Microsoft Dynamics HTTP Virtual Service:

  1. In the main menu of the LoadMaster Web User Interface (WUI), go to Virtual Services > Add New.

  2. Enter a valid IP address in the Virtual Address text box.
  3. Enter 80 in the Port text box.
  4. Enter a recognizable Service Name, for example MS Dynamic CRM HTTP.
  5. Ensure tcp is selected as the Protocol.
  6. Click Add this Virtual Service.
  7. Expand the Standard Options section.

  8. Deselect the Transparency check box.
  9. Select Super HTTP from the Mode drop-down list.
  10. Select 1 Hour from the Timeout drop-down list.
  11. Select least connection from the Scheduling Method drop-down list.
  12. Set the Idle Connection Timeout to 660 and click the Set Idle Timeout button.
  13. Expand the Advanced Properties section.

  14. Select Legacy Operation (X-Forwarded-For) from the Add HTTP Headers drop-down list.
  15. Expand the Real Servers section.

  16. Select the HTTP Protocol from the Real Server Check Parameters drop-down list.
  17. Enter / in the URL text box and click Set URL.
  18. Ensure HEAD is selected from the HTTP Method drop-down list.

  19. Add the Real Servers:
    1. Click the Add New button.
    2. Enter the IP address of the CRM Server.
    3. Enter 80 as the Port.
      Note: The Real Server Port should match the Virtual Service Port.
      Note: The Forwarding method and Weight values are set by default. An administrator can change these.
    4. Click Add this Real Server. Click OK to the pop-up message.
    5. Repeat steps b) to d) above to add more Real Servers as needed, based on the environment.