Configure AirWatch MAG Port 2010 Virtual Services

The following are the steps involved and the recommended settings to configure an AirWatch MAG port 2010 Virtual Service:

1. In the main menu of the LoadMaster WUI, go to Virtual Services > Add New.

   

2. Enter a valid IP address in the Virtual Address text box.
3. Enter 2010 in the Port text box.
4. Enter a recognizable Service Name, for example AirWatch MAG port 2010.
5. Ensure tcp is selected as the Protocol.
6. Click Add this Virtual Service.
7. Configure the settings as recommended in the following table:

   Section	Option	Value	Comment
   Standard Options	Transparency	Disabled
   	Server Initiating Protocols	Normal Protocols
   	Persistence Options	Source IP Address
   	Timeout	30 Minutes
   	Scheduling Method	round robin
   	Idle Connection Timeout	3600	Click Set Idle Timeout.
   Real Servers	Real Server Check Parameters	TCP Connection Only
   	Checked Port	2010	Click Set Checked Port.

8. Add the Real Servers.
   1. Enter the IP address of the AirWatch server.
   2. Enter 2010 as the Port.
      Note: The Forwarding method and Weight values are set by default. An administrator can change these.
   3. Click Add this Real Server. Click OK to the pop-up message.
   4. Repeat steps a) to c) above to add more Real Servers as needed, based on the environment.