To support additional UAG appliances, the Blast and PCoIP Virtual Services must be created for each. This section provides the necessary steps to add the UAG server to the configuration.

Follow the steps below to configure this Virtual Service:

  1. In the main menu of the LoadMaster WUI, go to Virtual Services > View/Modify Services.
  2. Click Modify on the UAG2 TCP Blast – Multi-Port Affinity Virtual Service.

  3. Click Duplicate VIP.

  4. Keep the same Virtual Address and change the port to 10343.
  5. Click Duplicate VIP.
  6. In the main menu of the LoadMaster WUI, go to Virtual Services > View/Modify Services.
  7. Click Modify on the UAG2 TCP Blast – Multi-Port Affinity [1] Virtual Service.
  8. Modify the Service Name (for example, UAG3 TCP Blast – Multi-Port Affinity)
  9. Expand the Real Servers section.
  10. Click Delete to remove the Real Server listed.
  11. Click OK on remove Real Server confirmation.
  12. Click Add New.
  13. Type the Real Server Address.
  14. Confirm that port 443 is entered.
  15. Click Add This Real Server.
    Note: UAG3 should be the only Real Server added to this Virtual Service.
  16. Repeat the above steps for:
Virtual Service to Duplicate New Virtual Service Port Real Server Port
UAG2 UDP Blast – Multi-Port Affinity 10343 8443
UAG2 TCP PCoIP – Multi-Port Affinity 10372 1072
UAG2 UDP PCoIP – Multi-Port Affinity 10372 1072
Note: The same port mapping scheme can be used for additional Unified Access Gateway appliances, 103xx – 199xx.