Create the NGINX IMAP with STARTTLS Virtual Service

Follow the steps below to create and configure the recommended settings for the Virtual Service:

1. In the main menu of the LoadMaster WUI, go to Virtual Services > Add New.

   

2. Type a valid IP address in the Virtual Address text box.
3. Type 143 in the Port text box.
4. Enter a recognizable Service Name.
5. Ensure tcp is selected as the Protocol.
6. Click Add this Virtual Service.
7. Configure the settings as shown in the following table:

   Section	Option	Value	Comments
   Basic Properties	Service Type	STARTTLS protocols
   Standard Options	Idle Connection Timeout	3600
   SSL Properties	Supported Protocols	TLS1.0, TLS1.1, TLS1.2, TLS1.3	While this workload may not support TLS1.3 yet, we recommend enabling it for future proofing.
   	Cipher Set	BestPractices
   Real Servers	Checked Port	143

8. Add the Real Servers:
   1. Expand the Real Servers section.
   2. Click Add New.
   3. Type the address of the Real Server.
   4. Type 143 as the Port.
   5. Click Add This Real Server.
   6. Repeat the steps above to add more Real Servers as needed, based on the environment.