Configuring a Virtual Service for POP with STARTTLS

To configure a Virtual Service for POP with STARTTLS, follow the steps below:

1. Select Virtual Services > Add New.

   

2. Enter a valid Virtual Address.
3. Enter 110 as the Port.
4. Enter a recognizable Service Name, for example Exchange 2010 POP with STARTTLS.
5. Click Add this Virtual Service.
6. Configure the settings as shown in the following table:

   Section	Option	Value	Comment
   Basic Properties	Service Type	STARTTLS protocols
   Standard Options	Transparency	Disabled
   	Idle Connection Timeout	3600	Click Set Idle Timeout.
   Real Servers	Checked Port	110	Click Set Check Port.

7. Add any Real Servers as needed.