Virtual Services – Web Access

Configure the LoadMaster settings by following the steps below in the LoadMaster WUI:

1. In the main menu, select Virtual Services and Add New.

   

2. Enter the relevant IP address in the Virtual Address text box.
3. Enter 80 as the Port.
4. Enter a recognizable Service Name, such as vWorkspace Web Access.
5. Click Add this Virtual Service.
6. Enter the details shown in the following table:
   Note: The LoadMaster will use this information to check if the Web Access servers are reachable.

   Section	Option	Value	Comments
   Standard Options	Persistence Mode	Source IP Address
   	Timeout	6 minutes
   	Scheduling Method	least connection
   Real Servers	Real Server Check Method	HTTP Protocol
   	Checked Port	80	Click Set Check Port.

7. Add the Real Servers.
   1. Click Add New to add the Secure Access servers as Real Servers.
   2. Enter the Real Server Address.
   3. Enter 80 as the Port.
   4. Click Add This Real Server.
   5. Repeat the three steps above until all Real Servers have been added.