Main Menu

To go to the relevant menu option, select the OK button from the main menu (this is currently highlighted).

The following options are available on the initial console menu:

1. Quick setup

   Configure the network settings for Kemp 360 Central. For step-by-step instructions on Quick Setup, go to the Quick Setup section.

2. Network setup

   Open the Network Setup menu.

   The Kemp 360 Central Network Setup menu enables you to configure the following:

   Network Configuration: Input the IP address of the Kemp 360 Central machine.

   Hostname Configuration: Enter the hostname of the current machine.

   DNS Configuration: Enter a space-separated list of name server IP addresses.

   Default Gateway Configuration: Enter the IP address of the default gateway. Kemp 360 Central requires a default gateway through which it can communicate with the Internet.

   Automatic Configuration: Select DHCP if you want to automatically configure the network settings for Kemp 360 Central.

   DHCP automatically sets the IP address, the hostname, the DNS, and the default gateway for Kemp 360 Central.

   You must reboot Kemp 360 Central to activate a change in Network Setup.

   Note: If DHCP is not enabled on the console, you can set it from the UI. If it is enabled on the console, you will not be able to change the settings on the UI. To access on the UI, click Settings and Configuration > Network Settings.
3. Ping Host

   Test the connection to a specified address. Enter any valid address to check if Kemp 360 Central can communicate with it, such as www.google.com.

4. Change Administrator Password

   Change the password of the Kemp 360 Central User Interface admin user.

   Note: The admin password for the console and the UI must be the same. When you change the password here, this also updates the password for the UI. If you want to reset the password for the console, you must know the current password.
5. Utilities

   Use this option if you need to reset the web server configuration. This resets the UI server certificate and the UI TLS protocols back to their default values.

   

6. Reboot

   Reboot the Kemp 360 Central machine.

7. Quit

   Exit the menu.