Lync Reverse Proxy HTTPS Virtual Service

To configure a Virtual Service for Lync Reverse Proxy HTTPS, follow the steps below:

1. Click the Add New button.

   

2. Enter a Virtual Address.
3. Enter 443 in the Port field.
4. Enter a recognisable Service Name, for example Lync Reverse Proxy HTTPS.
5. Ensure that TCP is set as the Protocol.
6. Click Add This Virtual Service.
7. Configure the settings as recommended in the following table:

   Section	Option	Value	Comments
   SSL Properties	SSL Acceleration	Enabled
   	Reencrypt	Enabled
   Standard Options	Persistence Mode	Source IP Address
   	Persistence Timeout	20 Minutes
   Real Servers	Real Server Check Method	TCP Connection Only
   	Checked Port	5061	Click Set Checked Port.

8. Expand the Real Servers section and select the following options:
   1. Click the Add New button.
   2. Enter the Real Server Address.
   3. Enter 4443 as the Port.
      Note: Ensure to not use 443 as the Real Server Port.
   4. Click the Add This Real Server button.