Aspera FASP UDP Virtual Service

The following are the steps involved and the values recommended to configure the Aspera FASP UDP Service:

1. In the main menu of the LoadMaster Web User Interface (WUI), go to Virtual Services > Add New.

   

2. Type a valid IP address in the Virtual Address text box.
3. Type * in the Port text box.
4. Enter a recognizable Service Name, for example Aspera FASP UDP.
5. Ensure udp is selected as the Protocol.
6. Click Add this Virtual Service.
7. Enter the details shown in the following table.

   Section	Option	Value
   Standard Options	Force L4	Disabled
   	Persistence Mode	Source IP Address
   	Timeout	6 Minutes
   	Scheduling Method	least connection

8. Add the Real Servers:
   1. Expand the Real Servers section.
   2. Click Add New.
   3. Type the address of the Aspera FASBUDP Server.
   4. Type * as the Port.
      Note: The Real Server Port should match the Virtual Service Port.

      Note: The Forwarding method and Weight values are set by default. An administrator can change these.
   5. Click Add this Real Server. Click OK to the pop-up message.
   6. Repeat the steps above to add more Real Servers as needed, based on the environment.