To configure the iDRAC module, follow the steps below.

  1. Connect and boot the iDRAC.

  2. At boot prompt, press F10 on the keyboard to enter the Lifecycle controller.

  3. In the main menu, select Home.
  4. Click Configure server for remote access (iDRAC).

  5. Click Network.

  6. Select Enabled for the Enable IPv4 option.
  7. Set the Static IP Address.
  8. Set the Static Gateway.
  9. Set the Static Subnet Mask.
  10. Click Back.

  11. Click User Configuration.

  12. Set the values as required.
  13. Click the Back button.
  14. Click Exit.
  15. Now, log in to the iDRAC module from a web browser by entering the IP address previously configured.
Note: Ensure to enter https:// before the IP address.