Powered by Zoomin Software. For more details please contactZoomin

Flowmon 12.5 - Supported Flow Standards

sFlow v2/4/5

  • Last Updated: April 5, 2026
  • 1 minute read
    • Flowmon Products
    • Flowmon
    • Documentation

Record Description Collector Configuration
input SNMP index of the input interface Collected by default
output SNMP index of the output interface Collected by default
src_as Autonomous system number of the source Collected by default
dst_as Autonomous system number of the destination Collected by default
src_vlan Source Virtual LAN

Enabled by

SRC/DST VLAN ID labels

dst_vlan Destination Virtual LAN

Enabled by

SRC/DST VLAN ID labels

dst_tos Destination type of service

Enabled by

SRC/DST mask, (dst) TOS, Direction

dir Direction / Directory

Enabled by

SRC/DST mask, (dst) TOS, Direction

src_mask Source address prefix mask bits

Enabled by

SRC/DST mask, (dst) TOS, Direction

dst_mask Destination address prefix mask bits

Enabled by

SRC/DST mask, (dst) TOS, Direction

in_src_mac Input source MAC address

Enabled by

In SRC/out DST MAC address

out_dst_mac Output destination MAC address

Enabled by

In SRC/out DST MAC address

nexthop IP address of next hop router

Enabled by

Next HOP IP address

bgp_nexthop BGP Next hop IP address

Enabled by

BGP next HOP IP address

first SysUptime at start of flow Collected by default
last SysUptime at the time the last packet of the flow was received Collected by default
fwd_status (sFlow data stored per record) Collected by default
tcp_flags Cumulative OR of TCP flags Collected by default
prot IP protocol type Collected by default
tos IP type of service (TOS) Collected by default
srcport TCP/UDP source port number or equivalent Collected by default
dstport TCP/UDP destination port number of equivalent Collected by default
scr_ipaddr Source IP address Collected by default
dst_ipaddr Destination IP address Collected by default
TitleResults for “How to create a CRG?”Also Available inAlert