PD-13904 SSO: Password expiry notifications do not currently work with Forms Based Authentication (FBA) enabled on the server side.
PD-13873 10 Gb Interfaces (AWS only): The AWS driver for 10 Gb interfaces (ENA) does not provide a link indication in its output, and so ‘No Link’ is the status displayed for a 10 Gb interface on AWS. Interface graphs for 10 Gb interfaces on the statistics page are not scaled properly, and so can run off the display; this will be addressed in a future release.
PD-13385 WAF: With WAF enabled on a Virtual Service, HTTP PUT commands that use chunked transfer encoding are dropped. This issue will be fixed in a future release.
PD-12838 ESP / SSO: The ESP Permitted Group SID(s) setting is not working as expected when configured on a on a SubVS.
PD-12653 Networking: A Hyper-V VLM won't boot when a 4th NIC is added.
PD-12616 WAF / Compression: With Web Application Firewall (WAF) enabled, compressed files are incorrectly decompressed. As a workaround, ensure compression is enabled in VS Advanced Properties by selecting the Enable Compression option.
PD-12492 Downgrade: If an Azure VLM is downgraded to the firmware version 7.1.35.x, the WUI may display in the top right-hand corner that the VLM is a Hyper-V VLM. This indicates that the Azure VLM Add-On Package must be added to the system to provide full Azure VLM functionality. If this occurs, please contact Kemp Support to get the required add-on package.
PD-12354 Hardware Support: The LoadMasters LM-X25 and LM-X40 do not support the following SFP+ modules in this release: LM-SFP-SX (SFP+ SX Transceiver 1000BASE-SX 850nm, 550m over MMF), LM-SFP-LX (SFP+ LX Transceiver 1000BASE-LX 1310nm, 10KM over SMF).
PD-12237 HA / NTP: Configuring NTP for the first time after the system is running in High Availability (HA) mode and when the current time on the machines is not correct, may cause the systems to both go into the Master state.
PD-12147 ESP / RADIUS: In a LoadMaster configuration with ESP and Radius server-side authentication enabled, sessions may fail to be established.
PD-12058 Browser Support: An issue exists when connecting to the LoadMaster WUI when using newer versions of the Firefox browser on initial configuration of a hardware FIPS LoadMaster.
PD-11861 RADIUS / IPv6: IPv6 is not supported by the current RADIUS implementation in the LoadMaster for both WUI Authorization and ESP Authentication.
PD-11166 Networking: Azure LoadMasters are not translating the additional network address between the Master and Slave correctly.
PD-11044 SharePoint Virtual Services: A second authentication prompt is presented when a file is uploaded to SharePoint with the following configuration: WAF is configured with Process Responses enabled on the main Virtual Service and KCD is enabled on the SubVS level for server-side authentication.
PD-10917 HA: An issue exists when setting up a 2-armed HA Virtual LoadMaster in Azure.
PD-10784 HA: Configuring LoadMaster HA using eth1 on an Amazon Web Services (AWS) Virtual LoadMaster does not work.
PD-10586 GEO: If a GEO FQDN is configured with All Available as the Selection Criteria, IP addresses are returned even if the cluster is disabled.
PD-10490 Content Rules: The vsremovewafrule RESTful API command does not allow multiple rules to be removed.
PD-10474 Intrusion Detection: A SNORT rule is triggering a false positive in certain scenarios.
PD-10466 Hardware Support: The LoadMaster LM-X15 does not support the following SFP+ modules in this release: LM-SFP-SX (SFP+ SX Transceiver 1000BASE-SX 850nm, 550m over MMF), LM-SFP-LX (SFP+ LX Transceiver 1000Base-LX 1310nm, 10KM over SMF).
PD-10193 Exchange 2010 Virtual Services: A WAF, ESP, and KCD configuration with Microsoft Exchange 2010 is not supported.
PD-10188 Browser Support: (Safari) When adding a Real Server to a Virtual Service or SubVS using the Safari browser, the list of available Real Servers is not available.
PD-10159 Statistics: When upgrading firmware from version 7.1.35.n, CPU and network usage graphs are not appearing. As a workaround, reset the statistics in the WUI.
PD-10136 Clustering: In a LoadMaster cluster configuration, a new node can be added with the same IP address as an existing node.
PD-10129 Virtual Services: There is a discrepancy in validation between global-level connection timeout and Virtual Service-level timeout.

PD-9854

PD-13385

 WAF: When WAF is enabled, any requests received that have chunked transfer encoding enabled (e.g., POSTs) are not processed properly and are not forwarded to a real server.
PD-9816 WAF: There is an API command to list individual rules in a ruleset, but there is no command to list the available rulesets themselves.
PD-9765 GEO: DNS TCP requests from unknown sources are not supported.
PD-9507 Networking: Unable to add an SDN controller using the RESTful API/WUI in a specific scenario.
PD-9476 WAF: There is no RESTful API command to get/list the installed custom rule data files.
PD-9375 SharePointVirtual Services: Microsoft Office files in SharePoint do not work in Firefox and Chrome when using SAML authentication.
PD-8853 GEO: Location Based failover does not work as expected.
PD-8725 GEO: Proximity and Location Based scheduling do not work with IPv6 source addresses.