PD-20101

Network Telemetry: The 7.2.56.0 version of the Network Telemetry Add-on may not function after being enabled on one or more interfaces. Flow data will not be sent to the Flowmon Collector and the following message will appear repeatedly in the system log:

flowd: Monitor for interface 0 (pid xxxxx) died - exited with status 1

The workaround is to remove the 7.2.56.0 version of the add-on package and install the 7.2.55.0 version, using the controls on the System Configuration > System Administration > Update Firmware page. The add-on package can be downloaded from the LoadMaster Add-on Packages page.

PD-19953 SNMPv2c Walk: When using SNMP Version 2c, the Walk command may not work, returning no data. The workaround is to enable the SNMPv3 check box in the SNMP configuration and then disable it. The Walk command should then work properly via SNMPv2c.
PD-19704 GEO Cluster Status: When adding a Cluster that is unavailable (DOWN) to a Site, the Site may reflect the Cluster's status as available (UP) for a short time before changing to DOWN.