Powered by Zoomin Software. For more details please contactZoomin

Flowmon 12.5 - Supported Flow Standards

NetFlow v5/7

  • Last Updated: April 5, 2026
  • 2 minute read
    • Flowmon Products
    • Flowmon
    • Documentation

Note:

When you configure a monitoring port to use NetFlow version 5 as its export protocol, fields marked as "Exported by default" are automatically included in the export.

Name Description Input Length (bytes) Probe Configuration Collector Configuration
srcaddr Source IP address. 4 Exported by default Collected by default
dstaddr Destination IP address. 4 Exported by default Collected by default
nexthop IP address of next hop router. 4 Not applicable

Enabled by

Next HOP IP address

input SNMP index of input interface. 2 Exported by default Collected by default
output SNMP index of output interface. 2

Exported by default

Always set to 0

Collected by default
dPkts Packets in the flow. 4 Exported by default Collected by default
dOctets Total number of Layer 3 bytes in the packets of the flow. 4 Exported by default Collected by default
First SysUptime at start of flow. 4 Exported by default Collected by default
Last SysUptime at the time the last packet of the flow was received. 4 Exported by default Collected by default
srcport TCP/UDP source port number or equivalent. 2 Exported by default Collected by default
dstport TCP/UDP destination port number or equivalent. 2 Exported by default Collected by default
tcp_flags Cumulative OR of TCP flags. 1 Exported by default Collected by default
prot IP protocol type (for example, TCP = 6; UDP = 17). 1 Exported by default Collected by default
tos IP type of service (ToS). 1 Exported by default Collected by default
src_as Autonomous system number of the source, either origin or peer. 2

Enabled by

Use autonomous system list

Collected by default
dst_as Autonomous system number of the destination, either origin or peer. 2

Enabled by

Use autonomous system list

Collected by default
src_mask Source address prefix mask bits. 1 Not supported

Enabled by

SRC/DST mask, (dst) TOS, Direction

dst_mask Destination address prefix mask bits. 1 Not supported

Enabled by

SRC/DST mask, (dst) TOS, Direction

router_sc

(NetFlow v7 only)

IP address of the router that is bypassed by the Catalyst 5000 series switch. This is the same address the router uses when it sends NetFlow export packets. This IP address is propagated to all switches bypassing the router through the FCP protocol. 4 Not applicable Collected by default
TitleResults for “How to create a CRG?”Also Available inAlert