Port Location - Front Panel

Item No. Item Description Notes
1. RAID (Dual HDD) RAID 1 (mirroring) Hot-Swap Disk (x2) Disk mirroring - replicating data of two or more disks
HDD LED - Green Indicates HDD is operating normally
HDD LED - Red Indicates a possible HDD issue (contact Progress Customer Support)
Rebuild LED - Blinking amber Indicates the HDD rebuilding process (could take several hours to complete)
2. ERR LED Error LED - off Indicates that the Power Supply Unit (PSU) status is normal
Error LED - red (blinking) Indicates PSU failure - either one or both (contact Progress Customer Support)
STBY LED Standby LED - Amber Indicates always-on
HDD LED LED - Green (blinking) Indicates HDD read/write activity
LED - Off Indicates no data transferring
PWR LED LED - Green Power on indicator
LED - Red (blinking) Indicates hardware monitor abnormality (contact Progress Customer Support)
LED - Off Power off indicator
3. 1 Gb Ethernet ports 1 GbE copper (RJ45) ports (x1) Fibre (SFP) port (x1) Logical Assignment

Port 0:1 map to ETH0:ETH1
Activity LED - Blinking Indicates network activity
Activity LED - Off Indicates no network activity
4. USB ports USB 3.0 ports (x2) Allows USB devices to connect to the system
5. Console Console connection Allows console devices to connect to the system
6. 10Gb Fibre SFP+ ports 10 Gb SFP+ ports (x8) Requires SFP+ modules (Purchase from Progress)

Logical Assignment

Port 2:9 map to ETH2:ETH9
Activity LED - Blinking Indicates network activity
Activity LED - Off Indicates no network activity
Link LED - On Link - connection established
Link LED - Off No link (cable disconnected)

Port Location - Rear Panel

Item No. Item Description Notes
7. VGA port Standard VGA interface Used to connect a VGA monitor
8. Power switch On/off switch Press to power on or hold until the device powers off
9. Dual Hot-Swap Power Supply 1300W 1+1 redundant power supply Power source for the system. Refer to item 2 for status LED indicators.
LED - Green Indicates power on mode
LED - Blinking green Indicates standby mode
LED - Amber Indicates loss of power supply redundancy and/or an issue with the power supply