Once the VLM has been deployed it can be powered on:

  1. Select the deployed VLM in the pane on the left.
  2. Click the Start button.

    If the LoadMaster does not obtain an IP address using DHCP the static IP address of 192.168.1.101 is assigned and the LoadMaster must be manually configured using the console.

    On initial deployment, DHCPv4 and DHCPv6 both run to attempt to obtain an IP address. If the LoadMaster obtains an IP address using DHCP, take note of it because this is how you will access the LoadMaster.

    Note: The console should launch and the VLM should begin to boot up.

Refer to the Configuring the LoadMaster via the Console section for instructions on how to manually set the IP address.