To add a Virtual Service for the View Connection Servers, follow the steps below:

  1. In the main menu of the LoadMaster WUI, select Virtual Services and Add New.

  2. Enter a valid IP address in the Virtual Address field.
  3. Enter 443 as the Port.
  4. Enter a recognizable Service Name, for example View Connection.
  5. Click Add this Virtual Service.
  6. Configure the settings as shown in the following table:

    Section

    Option

    Value

    		 Comment
    SSL Properties SSL Acceleration Enabled
    Certificates Select the relevant certificate. Click > to assign the certificate. Click Set Certificates.

    Standard Options

    		Transparency Disabled
    Persistence Mode Server Cookie

    		Persistence Timeout 6 Minutes

    		Cookie name JSESSIONID Click Set Cookie.
    Scheduling Method least connection

    Real Servers

    		URL / Click Set URL.
    HTTP Method GET
  7. Click Add New.

  8. Enter the relevant Real Server Address.
  9. Enter 80 as the Port.
  10. Click Add This Real Server.
  11. Click OK.
  12. Continue to add the remaining Real Servers by entering the Real Server Address and clicking Add This Real Server until all servers in the pool are added. When finished, click the Back button.
  13. In the main menu of the LoadMaster WUI, click View/Modify Services.
  14. Confirm that the newly created service is listed with a status of Up and that all of the added member servers are listed in black, non-bold font.