Configuring a Virtual Service for POP (without SSL Offload)

To configure a Virtual Service for POP3, without SSL offload, follow the steps bellow:

1. In the main menu of the LoadMaster WUI, select Virtual Services.
2. Select Add New.

   

3. Enter the Virtual Address.
4. Enter 110 as the Port.
5. Enter a recognizable Service Name, for example CAS-POP3-WOSSL.
6. Select tcp as the Protocol.
   Note: The combination of Virtual Address, Port and Protocol must be unique within the LoadMaster.
7. Click Add this Virtual Service.
8. Configure the settings as shown in the following table:

   Section	Option	Value	Comment
   Standard Options	Force L4	Disabled
   	Transparency	Disabled
   	Idle Connection Timeout	3600	Click Set Idle Timeout.
   Real Servers	Checked Port	110	Click Set Check Port.

9. Click the Add New… button.

   

10. Enter the Real Server Address.
11. Enter 110 as the Port.
12. Click Add This Real Server.
13. Click OK in response to the confirmation that the Real Server was added.

To view, modify, or delete any Virtual Services or Real Servers, select Virtual Services > View/Modify Services from the main menu of the LoadMaster WUI.