To configure a Virtual Service for POPS, follow the steps below:

  1. In the main menu, select Virtual Services > Add New.

  2. Enter a valid Virtual Address.
  3. Enter 995 as the Port.
  4. Enter a recognizable Service Name, for example Exchange 2010 POPS.
  5. Click Add this Virtual Service.
  6. Configure the settings as shown in the following table:

    Section

    Option

    Value

    		 Comment

    Standard Options

    		Transparency Disabled
    Server Initiating Protocols POP3

    		Idle Connection Timeout 3600 Click Set Idle Timeout.

    Real Servers

    		Checked Port 995 Click Set Check Port.
  7. Add any Real Servers as needed.