Create a Microsoft Print Server Virtual Service

The following are the steps involved and the recommended settings to configure the Microsoft Print Server Virtual Service:

1. In the main menu of the LoadMaster WUI, go to Virtual Services > Add New.

   

2. Type a valid Virtual Address.
3. Type * as the Port.
4. Type a recognizable Service Name, such as Microsoft Print Server.
5. Click Add this Virtual Service.
6. Configure the settings as recommended in the following table:

   Section	Option	Value
   Basic Properties	Service Type	Generic
   Standard Options	Force L4	Enabled
   	Persistence Options	Source IP Address
   	Timeout	1 Hour
   	Scheduling Method	least connection
   Real Servers	Real Server Check Method	TCP Connection Only
   	Checked Port	135

7. Add the Real Servers:
   1. Expand the Real Servers section.
   2. Click Add New.
   3. Enter the address of the relevant Real Server.
   4. Complete the other fields as required.
   5. Click Add this Real Server then click OK to the pop-up message.
   6. Repeat the steps above to add more Real Servers as needed, based on your environment.