Epicor ERP 10 HTTP

The following are the steps involved and the values required to configure Epicor ERP 10 HTTP Virtual Service:

1. In the main menu of the LoadMaster Web User Interface (WUI), go to Virtual Services > Add New.

   

2. Enter a valid IP address in the Virtual Address text box.
3. Enter 808 in the Port text box.
4. Enter a recognizable Service Name, for example Epicor ERP 10.
5. Ensure tcp is selected as the Protocol.
6. Click Add this Virtual Service.
7. Configure the settings as recommended in the following table:

   Section	Option	Value
   Standard Options	Force L4	Disabled
   	Transparency	Disabled
   	Server Initiating Protocols	Normal Protocols
   	Persistence Options	Source IP Address
   	Timeout	2 Hours
   	Scheduling Method	least connection
   Real Servers	Real Server Check Method	TCP Connection Only
   	Checked Port	808

8. Add the Real Servers:
   1. Click the Add New button.
   2. Enter the IP address of the ERP 10 server.
   3. Enter 808 as the Port.
      Note: The Forwarding method and Weight values are set by default. An administrator can change these.
   4. Click Add this Real Server. Click OK to the pop-up message.
   5. Repeat the steps above to add more Real Servers as needed, based on the environment.