Create an Epic Medical Systems HTTPS Virtual Service

The following are the steps involved and the recommended settings to configure the Epic Systems HTTPS Virtual Service:

1. In the main menu of the LoadMaster Web User Interface (WUI), go to Virtual Services > Add New.

   

2. Enter a valid Virtual Address.
3. Enter 443 as the Port.
4. Enter a recognizable Service Name, such as Epic Medical Systems HTTPS.
5. Click the Add this Virtual Service button.
6. Configure the settings as recommended in the following table:

   Section	Option	Value	Comment
   Standard Options	Persistence Mode	Source IP Address
   	Timeout	1 Hour
   	Idle Connection Timeout	900	Click Set Idle Timeout.
   Advanced Properties	Add a Port 80 Redirector VS	https://%h%s	Click the Add HTTP Redirector button. This automatically creates a redirect on port 80. This option is only visible if there is no existing port 80 redirect for this Virtual Service.

7. Add the Real Servers:
   1. Click the Add New button.
   2. Enter the address of the Epic Medical Systems HTTPS Server.
   3. Click Add this Real Server. Click OK to the pop-up message.
   4. Repeat the steps above to add more Real Servers as needed, based on the environment.