Virtual Services – Secure Access

Configure the LoadMaster settings by following the steps below in the LoadMaster WUI:

1. In the main menu, select Virtual Services and Add New.

   

2. Enter the relevant IP address in the Virtual Address text box.
3. Enter 443 as the Port.
4. Enter a recognizable Service Name, such as vWorkspace Secure Access Service.
5. Click Add this Virtual Service.
6. Enter the details shown in the following table:

   Section	Option	Value	Comments
   Standard Options	Persistence Mode	Source IP Address
   	Timeout	6 minutes
   	Scheduling Method	least connection
   SSL Properties	SSL Acceleration	Enabled
   	Reencrypt	Enabled
   	Assigned Certificates	Selected	Select the certificate in the Available Certificates box. Click the right arrow to move the certificate to the Assigned Certificates box then click Set Certificates
   Real Servers	Real Server Check Method	HTTPS Protocol
   	Checked Port	443	Click Set Check PortNew.

7. Select Reencrypt.
   Note: The LoadMaster will use this information to check if the Secure Access servers are reachable.
8. Add the Real Servers.
   1. Click Add New to add the Secure Access servers as Real Servers.
   2. Enter the Real Server Address.
   3. Enter 443 as the Port.
   4. Click Add This Real Server.
   5. Repeat the three steps above until all Real Servers have been added.