Aspera HTTPS-Failback Virtual Service

The following are the steps involved and the values recommended to configure the Aspera HTTPS-Failback Virtual Service:

1. In the main menu of the LoadMaster Web User Interface (WUI), go to Virtual Services > Add New.

   

2. Type a valid IP address in the Virtual Address text box.
3. Type 8443 in the Port text box.
4. Enter a recognizable Service Name, for example Aspera HTTPS-Failback.
5. Ensure tcp is selected as the Protocol.
6. Click Add this Virtual Service.
7. Enter the details shown in the following table:

   Section	Option	Value
   Standard Options	Transparency	Enabled Note: Further configuration may be required. Refer to the Transparency Feature Description for further details.
   	Persistence Mode	Source IP Address
   	Timeout	6 Minutes
   	Scheduling Method	least connection
   Real Servers	Checked Port	8443

8. Add the Real Servers:
   1. Expand the Real Servers section.
   2. Click Add New.
   3. Type the address of the Aspera HTTPS-Failback Server.
   4. Type 8443 as the Port.
      Note: The Real Server Port should match the Virtual Service Port.

      Note: The Forwarding method and Weight values are set by default. An administrator can change these.
   5. Click Add this Real Server. Click OK to the pop-up message.
   6. Repeat the steps above to add more Real Servers as needed, based on the environment.