To configure a Virtual Service for Lync Reverse Proxy HTTPS, follow the steps below:

  1. Click the Add New button.

  2. Enter a Virtual Address.
  3. Enter 443 in the Port field.
  4. Enter a recognisable Service Name, for example Lync Reverse Proxy HTTPS.
  5. Ensure that TCP is set as the Protocol.
  6. Click Add This Virtual Service.
  7. Configure the settings as recommended in the following table:

    Section

    Option

    Value

    		 Comments

    SSL Properties

    		SSL Acceleration Enabled
    Reencrypt Enabled
    Standard Options Persistence Mode Source IP Address
    Persistence Timeout 20 Minutes
    Real Servers Real Server Check Method TCP Connection Only
    Checked Port 5061 Click Set Checked Port.
  8. Expand the Real Servers section and select the following options:
    1. Click the Add New button.
    2. Enter the Real Server Address.
    3. Enter 4443 as the Port.
      Note: Ensure to not use 443 as the Real Server Port.
    4. Click the Add This Real Server button.