Aspera FASP TCP Virtual Service

The following are the steps involved and the values recommended to configure the Aspera FASP Virtual Service:

1. In the main menu of the LoadMaster Web User Interface (WUI), go to Virtual Services > Add New.

   

2. Type a valid IP address in the Virtual Address text box.
3. Type 33001 in the Port text box.
4. Enter a recognizable Service Name, for example Aspera FASP TCP.
5. Ensure tcp is selected as the Protocol.
6. Click Add this Virtual Service.
7. Enter the details shown in the following table.

   Section	Option	Value
   Basic Properties	Service Type	HTTP/HTTPS
   Standard Options	Persistence Mode	Source IP Address
   	Timeout	6 Minutes
   	Scheduling Method	least connection
   Real Servers	Checked Port	33001

8. Add the Real Servers:
   1. Expand the Real Servers section.
   2. Click Add New.
   3. Type the address of the Aspera FASP Server.
   4. Type 33001 as the Port.
      Note: The Real Server Port should match the Virtual Service Port.

      Note: The Forwarding method and Weight values are set by default. An administrator can change these.
   5. Click Add this Real Server. Click OK to the pop-up message.
   6. Repeat the steps above to add more Real Servers as needed, based on the environment.