Top Sources with Interfaces reveals interface metrics grouped by the flow source that exports them.

Identifying data transfer rate and capacity utilization from specific points on your network enables you to:

  • Identify packet choke points by checking where send or receive utilization is close to capacity.
  • Plan scaling and build out periods. Track high traffic routes over time.
  • Sanity check load balancing and track ToS-specific policies applied at routers.
  • Localize disruptive traffic to a specific router or interface.
  • Drill down into specific flow sources and configuration properties () of a particular network interface.
  • Be proactive.

Understand column data

The default view of each report contains a grid with the following columns:

  • Interface. Device hostname, IP address, or custom label grouped by Source with Ethernet port index. Index of 0 denotes the NULL interface.
  • Incoming
    • 位元組：已接收的位元組數。
  • Incoming Rate. Total average rate of inbound traffic.
  • Incoming
    • 使用率：已使用總頻寬容量的比例。「無」表示測量無法計算，因為目前之網路介面的頻寬容量不明。
  • Outgoing Bytes. Total bytes transmitted from the interface.
  • Outgoing Rate. Total average rate of outbound traffic.

如要要顯示流量與封包測量，請按一下資料欄標題（）中的資料欄選擇清單（）。您同時可加入：

  • Source Name. Device hostname, IP address, or custom label.
  • Interface Name. Textual name of the interface (ifName).
  • SNMP Index. Network interface SNMP table identifier (ifIndex).
  • In Speed. Inbound hardware speed.
  • Out Speed. Outbound hardware speed.
    提示: To show reports in full screen with most if not all possible columns, click on report options menu and choose Expand.

Generate a report

Choose source.
  • Choose a networking device or single physical or virtual interface.
  • Choose traffic direction across an interface.

Choose time constraints. (,) Choose times for the WUG17.0N-EMBEDDED-REPORT-BASE. (For recently observed measurements, select Last Polled from the Date Range drop down list.) Filter and reduce by row and by column. Sort and remove columns, group rows based on specific column values, and remove unwanted information from the table.

Chart, adjust output, and visualize. Apply chart, geo mapping (World Map), and display options in Report Settings dialog (optional).

  • 匯出報表資料

    您可以多種格式來將報表資料從 WhatsUp Gold 匯出、重複使用及發佈。從儀表板選項（）選單選取 [展開]（）。報表展開之後，選取「匯出資料」圖示來存取以下的選項：

    • HTML。產生並下載一個 .htm 檔案，以其顯示在 WhatsUp Gold 使用者介面中的形式來展示您的報表資料。
    • Excel。產生並下載一個內含您的報表資料的 .xml 試算表。
    • CSV：產生並下載一個內含報表資料的 .csv 檔案。
    • 文字：產生並下載一個內含報表資料的 .txt 檔案。
    • 排程匯出：設定報表資料匯出的週期性日期和時間、格式和電子郵件目的地。