Interface Errors report reveals packet discard count (specially due to error) for network interfaces associated with each device or device group you specify. Packets can be routinely discarded due to policy, hardware faults, and network outages. Interface Errors reports reveal an error-specific fraction of the total packet discard count reported in the Interface Discards report. At the network interface, discards due to error typically occur when a CRC (Cyclic Redundancy Check) or packet header inspection returns unexpected results.

了解資料欄資料

各報表的預設檢視，包含具有以下資料欄的格線：

  • Device.

    裝置主機名稱、IP 位址或自訂標籤。

  • Interface. Network interface with reported errors.
  • Rx Avg. Average incoming packets discarded due to error per minute for Date Range specified.
  • Rx Errors. Errors reported from inbound packets since polling began for Date Range specified.
  • Tx Avg. Average number of outgoing packets discarded due to error per minute for Date Range specified.
  • Tx Errors. Errors reported from inbound packets since polling began for Date Range specified.

  • 上次輪詢：自從上次取樣後的時間。

如要顯示其他測量資訊，按一下資料欄標題（）來打開資料欄選擇（）。您同時可加入：

  • 最小接收：最小平均接收量。

  • 最大接收：最大平均接收量。

  • 最小傳輸：最小平均傳輸量。

  • 最大傳輸：最大平均傳輸量。

    Generate a report

    Choose Device. Choose one or more host devices you want WUG17.0N-EMBEDDED-REPORT-BULLET-BASE-Pick Device measurements for.

    Choose time constraints. (,) Choose times for the WUG17.0N-EMBEDDED-REPORT-BASE. (For recently observed measurements, select Last Polled from the Date Range drop down list.) Filter and reduce by row and by column. Sort and remove columns, group rows based on specific column values, and remove unwanted information from the table.

    Chart, adjust output, and visualize. Fine tune report presentation and range of values displayed using the Report Setting dialog (optional).

    註: This report only returns EMBEDDED-REPORT-4E-BASE-NETWORK-ERRORS metrics for devices that already have the appropriate WMI or SNMP credentials. For more information, see Using Credentials.

註: To harvest data for this report, you must enable collection of Interface Utilization performance monitor data collection under Device Properties and ensure the Collect errors and discards data for all selected interfaces interface data collection configuration option is selected .

  • 匯出報表資料

    您可以多種格式來將報表資料從 WhatsUp Gold 匯出、重複使用及發佈。從儀表板選項（）選單選取 [展開]（）。報表展開之後，選取「匯出資料」圖示來存取以下的選項：

    • HTML。產生並下載一個 .htm 檔案，以其顯示在 WhatsUp Gold 使用者介面中的形式來展示您的報表資料。
    • Excel。產生並下載一個內含您的報表資料的 .xml 試算表。
    • CSV：產生並下載一個內含報表資料的 .csv 檔案。
    • 文字：產生並下載一個內含報表資料的 .txt 檔案。
    • 排程匯出：設定報表資料匯出的週期性日期和時間、格式和電子郵件目的地。