This monitor report displays the percent utilization for device interfaces.

  • Configure the data collection for a device by right-clicking the device in the Device list and selecting Properties > Performance Monitors, then selecting Interface Utilization > Configure.
  • Configure the data collection for a group by right-clicking a group in the Device list, selecting Bulk Field Change > Performance Monitors, and then making a selection from the Interfaces menu.

Monitor report body for device reports

When a device is selected, the percent utilization for the currently selected interface displays. Each point on the graph corresponds with an entry in the graph data table below. In Octets are graphed with a red line, while Out Octets are graphed using blue.

When multiple interfaces are present in the selected device, change the selected interface using the Interface menu.

变更图表外观

单击 “图表设定” 按钮可变更报表图表的显示方式。

Split Second Graphs - Real-Time Interface Utilization for devices

Under the main report graph is a Split Second Graph that displays real-time interface utilization data.

注： Split Second Graphs are not available in the Standard Edition.

Split Second Graphs are not available in VMware host reports.

When viewing information for devices running Microsoft Windows, information gathered via WMI is displayed in real time. Information gathered by SNMP, however, may reflect a delay of one minute or more. This delay is caused by a limitation in how often Microsoft Windows updates SNMP values.

Below the Split Second Graph, the Summary report displays the average interface utilization collected during the time period:

  • Min. The minimum bits per second rate recorded for the interface.
  • Max. The maximum bits per second rate recorded for the interface.
  • Avg. The average bits per second rate recorded for the interface during the time period.
  • Min Utilization %. The minimum interface utilization percentage recorded.
  • Max Utilization %. The maximum interface utilization percentage recorded.
  • Avg Utilization %. The average interface utilization percentage across all sample data for this time period.
注： Values displayed in the graph are the average values for the selected time period. Values displayed in the summary are the minimum, maximum, and average values for the selected time period. If raw polling data has been averaged into hourly or daily summarized data, the values for min and average, or maximum and average can be different. In some cases, they may be very different if there was a period of time when polled values were much higher or lower than normal.
注： You can verify your report rollup settings on the console via Program Options > Report Data.

Monitor report body for groups

Below the date/time picker is a table showing interface utilization across the current group for the selected time period.

  • Device. The name and IP address of the device.
  • Description. The label for the interface being shown.
  • Transmit %. The percentage of available bandwidth used by this interface in transmitting data.
  • Receive %. The percentage of available bandwidth used by this interface in receiving data.
  • Avg. Transmit. The average number of bytes transmitted through the interface.
  • Avg. Receive. The average number of bytes received through the interface.
  • Bytes Transmitted. The total number of bytes transmitted through the interface.
  • Bytes Received. The total number of bytes received by the interface.

Split Second Graphs in group reports

To see a real-time graph for the utilization of a device, hover over the interface description in the Description column.

导航

  • 若要变更查看的设备，请单击当前架构下的群组或设备名称，然后在设备选择程序中选择新设备。
  • 选择其他报表按钮可切换到其他设备的监控工具报表。

查看属性

若要查看当前群组或设备的属性，请单击工具栏中的属性。